Favoreats
Favoreats LLC
GET — On the App Store
INGREDIENTS
1 square
to make the cabinet base
1 serving
attach back of cabinet
1 serving
lay out each side of the table frame. drill pilot holes through the sides of the frame. apply glue to the miter cuts and fasten the frame together using 3-1/2” screws
1 serving
layout each side of the leg frame. drill pilot holes through the sides of the frame. apply glue to the miter cuts and fasten the frame together using 3-1/2” screws
1 serving
measure the length and width from the outer edge of rabbet
3/4
plywood. apply glue inside rabbet cut. the leg inset should fit flush inside the frame. fasten to the frame using 1
1 serving
attach the table to the cabinet
1 serving
locate studs in wall and hang completed cabinet to the wall by driving 2-7/8” headlok screws through the back of the cabinet into the wall's studs
1
2
3
4
5
6
1 serving
from 1x2” boards
7
8
1
next
9
10
11
12
1
next
13
14
15
16
17
18